Product Description
The Petro Plate M5/800 series is a calcium sulfonate complex thickened lubricating grease. It is specially formulated for mining equipment, construction equipment, and other heavy-duty applications. This grease contains 5% molybdenum disulfide for protection against the most severe shock loads that affect pins, bushings, and joints on heavy-duty equipment. Petro Plate M5/800 series grease is fortified with additives that insure long service life and excellent corrosion resistance. Typical applications are electric and hydraulic shovels, draglines, haul trucks, loaders, crawler and rubber tire dozers, pins, bushings, and low to medium speed bearings.
Features & Benefits
Excellent pin and bushing life.
Superb mechanical stability.
Outstanding EP performance.
Exceptional water washout resistance.
Excellent performance in wet conditions.
Superior resistance to rust and corrosion.
Product Application
Petro Plate M5/800 series can be applied through all automatic lubrication equipment or manually through a hand held grease gun.
Petro Plate M5/800 series working temperature range #00 is -45 to 40 oC, #0 is -30 to 70 °C, #1 is -25 to >160 °C, and #2 is -15 to >160 °C.
Petro Plate M5/800 series is available in 35 lb pails, 120 lb kegs, 400 lb drums, and bulk containers.
Note: Petro Plate M5/800 series is designed to extend component service life while reducing lubricant consumption in all applications.
Petro Plate M5/800 Series
|
|
| Typical Data |
| |
Property | Method |
NLGI #00 |
NLGI #0 |
NLGI #1 |
NLGI #2 |
Texture |
| Smooth | Smooth | Smooth | Smooth |
Color |
| Gray | Gray | Gray | Gray |
Base Oil Viscosity (40oC) | ASTM D445 | 150 | 150 | 150 | 150 |
Penetration (worked 60 double strokes) | ASTM D217 | 400-430 | 355-385 | 310-340 | 265-295 |
Mechanical Stability (worked 100,000 double strokes) | ASTM D217 | < 3.0% | < 3.0% | < 3.0% | < 3.0% |
Roll Stability | ASTM D1831 | <3% | <3% | <3% | <3% |
Dropping Point (oC) | ASTM D2265 | >220oC | >288oC | >288°C | >288°C |
Corrosion Prevention | ASTM D1743 | Pass | Pass | Pass | Pass |
Corrosion, Copper Strip | ASTM D4048 | 1b | 1b | 1a | 1a |
Oxidation Stability (% psi drop @ 100 hours (99oC)) | ASTM D942 | <1 | <1 | <1 | <1 |
Oil Separation (% loss) | ASTM D1742 | <1.0 | <1.0 | <0.5 | <0.5 |
Four Ball EP, Weld load (kg) | ASTM D2596 | 800 | 800 | >800 | >800 |
Four Ball EP, LWI (kg) | ASTM D2596 | 100 | 100 | 125 | 125 |
Four Ball Wear (mm) | ASTM D2266 | 0.5 | 0.5 | 0.6 | 0.6 |
Water Washout (% Loss) | ASTM D1264 | <1 | <1 | <1 | <1 |
Ventmeter, 600 psi <30 sec. | Lincoln VE-1 | -30oC | -15oC | -10oC | 0oC |
Molybdenum Disulfide (Wt.%) |
| 5.0 | 5.0 | 5.0 | 5.0 |
Salt Fog Corrosion (1mil d.f.t., hours) | ASTM B117 | >800 | >500 | >500 | >500 |