Steel Plant Indurating Machines Grease

Steel Plant Lubricants for Indurating Machines

Performance Products Tech (FZE) TEMP LUBE 242 Indurating Machines Grease: A unique blend of graphite, oil, and additives that forms a heavy-bodied, liquid lubricant for grate systems.

Typical Properties lubricants for indurating machines -

  1. Specific Gravity  @ 60°F 1.0 + 0.05

  2. Brookfield Viscosity, cps 5 R.P.M. @ 72°F 10,000 (Min.)

  3. SUS @100ºF 8,000-12,000

  4. Color Black

  5. Solids Content, % min. 12.0

  6. Particle size  micron 5-10

  7. Flash Point, °F. over 500

  8. Fire Point, ° 600

Lubricants for Indurating Machines
Lubricants for Indurating Machines

Application of Petron Lubricants for Indurating Machines Sinter Pellet Grate System - Best Grease for Bushings

Petron HI-TEMP LUBE 242 grease lubricants for indurating machines sinter pellet is formulated, Indurating Machines Grease spread evenly to give consistent lubricant film that carries for long distances from the application point. Particle size is selected to offer the greatest coverage and still remain in the suspension of oil vehicles. Base oil, together with high-temperature oxidation inhibitors, is designed for lubrication of castings when in contact with sidebars under conditions of high temperatures and contamination.

WARRANTY – NOTICE: THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED INCLUDING ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE SINCE THE USE OF THE PRODUCT IS BEYOND OUR CONTROL. STATEMENTS CONCERNING THE USE OF PETRON PRODUCTS ARE NOT TO BE CONSTRUED AS RECOMMENDING THE INFRINGEMENT OF ANY PATENT. IMPORTANT:

Before using Hi-Temp Lube / Grease 242 for steel mill lubricants for Indurating Machines Grate System, always be sure to read and follow precautions and directions for use appearing on the Indurating Machines Grease product container label. 

Mills - lube for bushings

Gear Shield®
NC

Grease for mills and kilns. The High Viscosity base lube allows for an economically controlled application of lubricant using via intermittent Automatic Lubrication Spray system. For use in ambient temperature 0°C (32°F) & above

Gear Shield®
NCW

Open girth gear lube for mills and kilns. High Viscosity Fluid, designed to be sprayed through all automatic lubrication equipment. May be applied by spraying, brushing, or dripping. For using below ambient temp. 0°C (32°F).

Gear Shield®
NC Aerosol

Packed in an aerosol spray can, this is High viscosity type residual lube. This is a CFC free, the heavy-duty lubricant that forms a tenacious lubricating film. The aerosol packaging makes it ideal for lubricating, chains, cables, wire.

Gear Shield®
Synthetic

Synthetic is a transparent open girth gear grease, a new generation lubricant, provides a tenacious film. An excellent choice for all stationary rotating machinery.  May be applied by spraying, brushing. 

Gear Shield®
P

Synthetic high viscosity grease, especially effective on rotating machinery operating at elevated temp. e.g. kilns, driers, and coal mills.  Use for at elevated temp. above 93°C (200°F).

Steel Plant Indurating Grate Lubricants for Indurating Machines

Hi Temp
242

The unique blending of graphite, oil, and additives that forms a heavy-bodied, liquid lubricant for Indurating machines traveling grate systems. HI-TEMP LUBE 242 is formulated to spread evenly to give a consistent lubricant film that carries for long distances from the application point.

Gear Cases - Bushings Grease

Petro Lube 700
Series Oil

High performance synthetic extreme pressure (EP) PAO gear lubricant designed to provide extended oil life, outstanding wear protection, and improved equipment life under the most extreme conditions. Gear reducers – worm gears, High impact gear drives, Mobile gear drive systems

Bearings - lubricate bushings

HV
EP Moly

Moly based HV grease used were recommended by OEM to reduce metal to metal contact. Used for bearing in a contaminated environment, dirt, wood, chips, slag, grinding dust, airborne contamination. Exceptional film strength provided. 

MV
EP Moly

Moly based MV is medium viscosity grease, designed to extend bearings life in heavy-duty applications. Where the loads are high, moderate RPM elevated temperature to reduce metal to metal contact. Used as recommended by OEM. 

Petro Plate HD
Series

Petro plate is Premium EP grease with Calcium sulfonate, with excellent performance high temperature, very good adhesion qualities, superb adhesion, structural stability and resistance to water contamination, structural stability, and other qualities. 

Bearings

Petro Kleen
140

Viscous, petroleum-based, designed to clean open and soften gearing of lubricant and contamination build-up in gear tooth roots. Has high levels of EP additives to protect gearing during the cleaning process. Applied through the automatic lubrication system in place of the lubricant. 

Gear Run-In
391

Open gear lubricant product blended with oil and chemical additives designed to remove minor damage, tooth surfaces finish asperities, and improve the contact pattern on gear and pinion drives. Application is via handheld spray equipment directed into gear mesh at frequent intervals.

Please send your inquiries to Performance Products Tech (FZE), PPT (FZE), and Sharjah (UAE). Email: contact@performanceproducts.tech

Petron Cement Industry Lubricants Brochure

View brochure for an easy to read on guide for all the products offered by us.

Download the PDF