MV EP1 Moly Grease - Lithium Moly EP 1Grease
Performance Products Tech (FZE) offers Lithium Moly Grease MV EP 1 with Lithium Complex Thickener. MV EP1 Moly Grease is designed for use in applications where Moly grease is recommended by an OEM or is preferred when additional protection is needed.
MV EP1 Lithium Moly Grease is designed to extend bearing service life in heavy-duty applications where loads are high, RPM is moderate, and elevated operating temperatures may be a factor.
Petron MV EP 1 Moly Grease is designed for industries where bearings are subject to contamination from dirt or manufacturing residue such as wood chips, slag, grinding dust, or airborne contaminants.
Typical industrial users of MV EP1 Moly Grease are steel, mining, cement, power generation, forest products, paper, and agriculture. Typical uses are heavy-duty applications and construction equipment
Features & Benefits
Exceptional film strength provided through Lithium Complex thickener.
MV EP1 Moly Grease: Dropping point in excess of 500 deg. F to perform at extended elevated operating temperatures.
Four-Ball EP Weld Load in excess of 315 kg to withstand continual heavy loads.
Addition of Moly and EP additives to reduce metal-to-metal contact under extreme conditions and shock loading.
Contains a unique blend of additives for outstanding performance at higher temperatures and better adhesion in wet environments.
Superior resistance to rust and corrosion.
MV EP1 Moly Grease is environmentally friendly.
Applications
MV EP1 Moly Grease with lithium Thickener can be applied through all automatic lubrication equipment or manually through a handheld grease gun. Petron MV EP 1 Lithium Moly Grease is available in pails, kegs, drums, and bin tanks.
Notes: Petron MV EP 1 Moly Grease with Lithium Complex Thickener, is designed to extend component service life while reducing lubricant consumption in all applications. If in doubt regarding the volume and/or frequency of lubricant to a specific lube point, contact us.
Petron MV EP 1 Lithium Moly Grease | ||
Property | Test Method | Petron HV EP 1 Moly Grease |
NLGI GRADE |
| 1 |
Thickener |
| Lithium Complex |
Dropping Point | ASTM D-2265 | 500 deg. F (260 deg. C) |
Penetration, Worked 60 strokes | ASTM D-217 | 310 – 340 |
Base Oil Viscosity, cSt @ 40 deg. C | ASTM D-445 | 140 – 180 |
Base Oil Viscosity, cSt @ 100 deg. C | ASTM D-445 | 13.5 – 16.5 |
Water Wash-out | ASTM D-1264 | 10% Maximum Loss |
Rust Test | ASTM D-1743 | Pass |
Timken OK Load, LB | ASTM D-2509 | 50 |
Four Ball EP Test, weld point, kg | ASTM D-2596 | 315 |
Four Ball Wear Scar Diameter | ASTM D-2266 | 0.6 mm |
Copper Strip Corrosion | ASTM D-4048 | 1b |
IMPORTANT: Before using Petron MV EP 1 Lithium Moly Grease, always be sure to read and follow precautions and directions appearing on the product container
Please send your inquiries to Performance Products Tech (FZE), PPT (FZE), and Sharjah (UAE). Email: contact@performanceproducts.tech