Bushing Grease - Crusher Spider Bushing Lube
Performance Products Tech (FZE) gyratory crusher shaft sleeve lubricant (Crusher Spider Bushing Lubricant) is a non-polymer, viscous, semi-fluid, lubricant designed to lubricate spider sleeve – bushings found in Gyratory crushers applications. Crusher Spider Sleeve Lubricant provides maximum protection to crusher spider bushings in all conditions. Petron Gyratory Crusher Shaft Sleeve – bushing lubricant provides superior, proven cold-temperature pumpability, coupled with nanotechnology to assure maximum protection of crusher spider bushings, and is designed to be applied through all automatic lubrication equipment, using gyratory crusher shaft sleeve lubricant.
Features & Benefits of Bushing Grease
Petron specialty (engineered) lubricant for crusher Gyratory Crusher Shaft Sleeve is formulated to lubricate heavily loaded crusher spider sleeves/busings.
High viscosity fluid designed to flow allowing the lubricant to coat the entire shaft and
bushing, extending component life while reducing consumption.
Solid and organo-metallic anti-wear and extreme pressure additives provide unparalleled
protection in the most heavily loaded zones.
Recommended for use in all ambient temperature conditions, both summer and winter.
Does not use polymers to attain its high viscosity.
Environmentally friendly, does not contain chlorinated solvents or lead, and is free of all
known carcinogens.
Petron lubricant for Crusher Spider Shaft sleeves is recommended in colder climates.
Petron Spider Sleeve – Bushing H Lube is recommended in warmer climates
Product Application - Crusher Spider
Petron Engineered (specialty) Lubricant for Gyratory Crusher Spider Shaft Sleeves / Bushing is designed to lubricate spider bushings found in crusher applications. Petron Crusher Spider Lubricant is designed to be applied through all automatic lubrication equipment. Petron Spider Bushing Lubricant is available in two grades. Both are packaged in pails, kegs, drums, bin tanks, and one-way bulk flexible bagsricant.
Petron Engineered (specialty) Lubricant for Gyratory Crusher Shaft Sleeves / Bushing is designed to lubricate spider bushings found in crusher applications. Petron Crusher Spider Lubricant is designed to be applied through all automatic lubrication equipment. Petron Spider Bushing Lubricant is available in two grades. Both are packaged in pails, kegs, drums, bin tanks, and one-way bulk flexible bagsricant.
Sl No. | Property | Method | Typical Data | |
|---|---|---|---|---|
Crusher Spider Bushing | Crusher Spider Bushing H | |||
1. | Color | Visual | Brownish Black | Brownish Black |
2. | Appearance | Visual | Viscous, Semi-Fluid | Viscous, Semi-Fluid |
3. | Flash Point | ASTM D-92 (C.O.C.) | 160ºC | 160ºC |
4. | 4 Ball EP, Weld Point (Kg) | ASTM D-2596 | 315 | 315 |
5. | Rust | ASTM D-1743 | Pass | Pass |
6. | Ventmeter, 600 psi, 30 seconds | Lincoln VE-1 | -20C | 0 oC |
7. | Viscosity, cPs @ 72°F | PTM 114 | 15,000 | 95,000 |
In extremely cold weather conditions you must be able to slow down the actuation of the pump and extend out the fault timers to be successful as you approach extreme cold conditions. You must also make sure vent meter reading in seconds as posted on PDS are acceptable for the injector model and machinery you plan to lubricate. The published vent time, when added to the required time to reach system pressure must be less than the cycle time set on the PLC of the auto lube system. Injector blocks should be as close as possible to the site of the lubricant application. | ||||
Values listed are typical, normal manufacturing variations are expected. No warranty is expressed or implied regarding results obtained from use. Information contained on this Product Data Sheet is subject to change without notification. Before using this product, always be sure to read and follow precautions and directions for use appearing on the product container. Seller shall not be liable for any loss or damage in case of using Gyratory Crusher Shaft Sleeve lubricant.
Recommended for use in all ambient temperature conditions, both summer and winter.
Please send your inquiries to Performance Products Tech (FZE), PPT (FZE), and Sharjah (UAE). Email: contact@performanceproducts.tech