Calcium Sulfonate Grease - Calcium Sulfonate 5 Moly Grease
The Petro Plate M5/800 series is a calcium sulfonate complex 5 Moly grease for lubricaring. It is specially formulated for mining equipment, construction equipment, and other heavy-duty applications.
Petron calcium sulfonate complex grease contains 5% molybdenum disulfide for protection against the most severe shock loads that affect pins, bushings, and joints on heavy-duty equipment. Petro Plate M5/800 series Calcium Sulfonate 5 Moly grease is fortified with additives that ensure long service life and excellent corrosion resistance.
Typical applications of Petron Calcium Sulfonate Moly Grease are electric and hydraulic shovels, mining draglines, haul trucks, loaders, crawlers, and rubber tire dozers, pins, bushings, and low to medium speed bearings.
Benefits of Molybdenum Grease - Complex 5 Moly Grease
Excellent pin and bushing life.
Superb mechanical stability.
Outstanding EP performance.
Exceptional water washout resistance.
Excellent performance in wet conditions.
Superior resistance to rust and corrosion.
Petron Calcium Sulfonate Moly Grease - Uses of Grease calcium Sulfonate
Petron Calcium Sulfonate 5 Moly Petro Plate M5/800 series can be applied through all automatic lubrication equipment or manually through a hand held grease gun.
Petro Plate M5/800 series (Calcium Sulfonate Complex 5 Moly Grease) working temperature range #00 is -45 to 40 deg. C, #0 is -30 to 70 deg. C, #1 is -25 to >160 deg. C, and #2 is -15 to >160 deg. C.
Petro Plate M5/800 series is available in 35 lb pails, 120 lb kegs, 400 lb drums, and bulk containers.
Notes: Petro Plate M5/800 series is designed to extend component service life while reducing lubricant consumption in all applications. If in doubt regarding the volume and/or frequency of lubricant to a specific lube point, please contact us, for Calcium Sulfonate Moly Grease. For more details on Petron M5/800 5 Moly Grease and the datasheet please visit:
Property | Method | Typical Data of Petron 5 Moly Grease | |||
NLGI #00 | NLGI #0 | NLGI #1 | NLGI #2 | ||
Texture |
| Smooth | Smooth | Smooth | Smooth |
Color |
| Gray | Gray | Gray | Gray |
Base Oil Viscosity (40 deg. C) | ASTM D445 | 150 | 150 | 150 | 150 |
Penetration (worked 60 double strokes) | ASTM D217 | 400-430 | 355-385 | 310-340 | 265-295 |
Mechanical Stability (worked 100,000 double strokes) | ASTM D217 | < 3.0% | < 3.0% | < 3.0% | < 3.0% |
Roll Stability | ASTM D1831 | <3% | <3% | <3% | <3% |
Dropping Point (deg. C) | ASTM D2265 | >220 deg. C | >288 deg. C | >288 deg. C | >288 deg. C |
Corrosion Prevention | ASTM D1743 | Pass | Pass | Pass | Pass |
Corrosion, Copper Strip | ASTM D4048 | 1b | 1b | 1a | 1a |
Oxidation Stability (% psi drop @ 100 hours (99 deg. C)) | ASTM D942 | <1 | <1 | <1 | <1 |
Oil Separation (% loss) | ASTM D1742 | <1.0 | <1.0 | <0.5 | <0.5 |
Four Ball EP, Weld load (kg) | ASTM D2596 | 800 | 800 | >800 | >800 |
Four Ball EP, LWI (kg) | ASTM D2596 | 100 | 100 | 125 | 125 |
Four Ball Wear (mm) | ASTM D2266 | 0.5 | 0.5 | 0.6 | 0.6 |
Water Washout (% Loss) | ASTM D1264 | <1 | <1 | <1 | <1 |
Ventmeter, 600 psi <30 sec | Lincoln VE-1 -30 | -30 deg. C | -15 deg. C | -10 deg. C | 0 deg. C |
Molybdenum Disulfide (Wt.%) |
| 5.0 | 5.0 | 5.0 | 5.0 |
Salt Fog Corrosion (1mil d.f.t., hours) | ASTM B117 | >800 | >500 | >500 | >500 |
Regarding the use of Calcium Sulfonate 5 Moly Grease: In extremely cold weather conditions it is important that you are able to slow down the actuation of the pump and extend out the fault timers in order to be successful as you approach extreme cold conditions.
You must also make sure vent meter reading in seconds as posted on PDS are acceptable for the injector model and machinery you plan to lubricate. The published vent time, when added to the required time to reach system pressure must be less than the cycle time set on the PLC of the auto lube system. Injector blocks should be as close as possible to the site of the application.
Testing listed is typical, no warranty is expressed or implied regarding results obtained from use. Information contained on this Product Data Sheet for calcium Sulfonate 5 Moly Grease is subject to change without notification. Seller shall not be liable for any loss or damage.
Please send your inquiries to Performance Products Tech (FZE), PPT (FZE), and Sharjah (UAE). Email: contact@performanceproducts.tech